SHOPPING CART
WANT TO SEE PICTURES OF KITS IN USE?

View our Timber Frame Kits in our Portfolio.

14X20 HENNIN POST & BEAM BOAT HOUSE

We designed this frame for those with a smaller lot or need for a smaller structure using traditional all wood joinery. Great for use as a starter cottage on your land, dry storage, workshop, bedroom addition, garage, one-horse barn, guest cabin (for the guest who you can only tolerate for short visits), or as the design title suggests, a boat house. Expand this frame in 10-ft increments.

14' BENT PRICING*

This kit is engineered to accommodate comfortable living and storage spaces using traditional, all wood joinery. Wedged half-dovetail mortice and tenon joints lock these timbers together tightly.

14’x10’ bent modules allow this kit to be expanded to virtually any length! Place two or more kits side by side, offset, or add a shed to any face of the structure to vary the roof line. The possibilites are endless. Estimate for adding an additional 10 foot bent is decribed below.

Our kits exceed the R-value requirements of the 2012 International Energy Conservation Code (IECC). The details of the structure as well as the insulation can be modified to meet your project, site and budget needs. Remember, most of the timber frames that we build are custom designed!

 
14x20 Pricing
 
14'x20'pre-cut kit
 
15,800
 
kit raising
 
3,000
 
SIP** Enclosure
 
16,250
 
Install SIPs
 
3,750
 
metal roofing
 
3,750
 
Install Roofing
 
1,450
 
14'x20' Subtotal
 
$44,000
       
 
Make this building longer by 10-ft increments
  additional bent   7,340
  bent raising   1,500
  SIP** Enclosure   6,800
  Install SIPs   1,700
  Metal Roofing   1,650
  Install Roofing      650
  14'x30' Subtotal   $63,640
NOTES:

*All Pricing subject to change without notice. Prices are FOB Woolwich, ME; shipping is not included. Included, but not shown, are second floor boards: nominal planed 2-in V-match T&G with rough opening for stairs.

Timber Frame Specs: 10-ft ceiling height, 2-ft kneewall, 12/12 roof pitch.

**Panel Specs: 5-1/2-in R-25 wall, 11-1/2-in R-45 roof EPS foam-core panels

The Wood: We can build these frames with nearly any wood species. Timbers are carefully selected for appearance. Prices above are for Eastern Hemlock or Eastern White Pine. Green timbers are planed, chamfered, and oiled to protect the surface, reduce checking, and slow the drying process. All timbers are planed full dimension unless otherwise specified.

Kits include all pegs and wedges, as well as nominal 2-inch tongue and groove decking on the second floor.

Curved or straight braces are available per your specification.